Korg DSS-1 Gets New/Cheap Floppy Alternative: Now in SD!

Glen Stegner DSS-1

That’s right, SD, not “HD.”

After I discovered the HxC Floppy Emulator that I talked about here, I knew right away this was the answer to my problems for my Korg DSS-1 with a broken floppy drive.  The floppy drive, a noisy, slow, prone-to-break 720K/3.5″ sort, are going for nasty amounts of money on eBay, because sellers know they aren’t made any longer and will be needed soon by nostalgia geeks fixing up older computer systems and synthesizers from yesteryear.

To recap the other article really quickly, I discovered this strange little USB unit, made by a nice duo known as Jeff and Lotharek, that is simply a floppy emulator.  There is an internal OS that manages the files and a separate “A,” and “B,” drive, partitions the information fed to it appropriately so the drive is recognized on your machine of choice, be they Amiga, Atari ST, Prophet 2000 or Korg DSS-1 sampler/synths.  The only qualm I had was being tethered to a USB cord plugged into another computer; I also needed a way to install it properly.  Granted, my Korg DSS-1 won’t be winning any featherweight competitions any time soon, but the less shackles, the better.

Luckily, the Jeff/Lotharek pair came up with a new SD-card variant, which kicked me into excitement mode.  I learned it is indeed tapped perfectly for 3.5″ drive specifications, so it would have a great chance at fitting in my Korg DSS-1.  It takes SD cards, therefore, no cord, and came with the designer/builder’s assurance it would work with my old sampler beast.  About $100 later, I was well on my way to figuring out if this really could be installed and solve my floppy woes. I was on pioneering ground, it seems, for with the exception of a USB-corded version working unmounted in a DSS-1, this particular fit hasn’t been done until now.

Faced with another inspired individual who does this upgrade, making the Korg DSS-1 work (or work better) isn’t a brand-new idea.  The problem is, I have economic problems taking a  synth/sampler and putting huge cost into it for unknown gain.  This is a great board, and this is a great upgrade, but I’m broke, have little space, and have better things to do with $400 right now.  I just wanted the thing to work to the best of my ability.

So it’s true, this fix isn’t the top-of-the-line upgrade you can give your Korg DSS-1, but it sure is an upgrade from your 720K drive, and will certainly replace your broken drive quite well.

About two weeks later, a package from Poland came, and I went right to work hooking up the unit to the Korg DSS-1 to find out what it would be like.  The power mains for the original floppy drive fit, but I found I had to deal with a small lock-tab that wasn’t accounted for on the HxC SD Floppy Emulator.   Not a big deal.  It worked fine, and I made sure to use the original floppy ribbon cable (not the type twisted on 10, 11, 12 — just the straight-through) for the synth, and my adventure began.

A little struggle was had finding the ideal setup with the configuration software (available here) but it isn’t hard to figure out.  I first formatted the SD card through Windows 7 as “FAT,”  used “Generic Shugart,” to make the HXCSDFE.CFG file (very important) needed to go onto the SD card (I used a Kingston 2GB C4).  Last, I loaded up the *.DSK files I found here onto the SD card, plugged it into the emulator, and finally accessed the *.DSK files with the “Multi Sound,” option on the DSS-1.  I was also able to write drawn waveforms, but that requires a new “disk,” (which is what a .DSK file is to the emulator and the DSS-1), and thus, didn’t have much room.

All of these features are used with controls on the HxC SD Floppy Emulator itself, in the order of three buttons on the lower right hand corner of the unit.  One button accesses the menu/confirms, and the other two are used to scroll through the file list on your SD card.  They appear as XXXXXXX_DSK.HFC — *.HFC is the file that the emulator recognizes, and then that sends the *.DSK file to the Korg DSS-1.  Once you’ve selected a file and confirm, the “disk,” is loaded, and ready for your Korg DSS-1 to start wailin’ away on your Hammond B3 samples!  Well, if you have those.

It should be noted a program called  “CopyQM,” is the way you could go between *.DSK files and an IBM/the DSS-1.  The file systems between your computer and the DSS-1 are not technically compatible, however  I never used CopyQM to do any of this, just threw the downloaded *.DSK files from the link above on the SD card.  You may need CopyQM in the future to get your files from old DSS-1 disks to your computer, but after that, they should be fair game onto this SD card upgrade.

I am not a Korg DSS-1 expert.  I’m barely a novice.  It is the first and only one I have ever laid eyes upon or worked with.  The seasoned Korg DSS-1 pro will probably be able to get much more out of this unit with this little SD Floppy Emulator gem inside of it.

One thing I know wasn’t an option was having it just dangling loose outside the case, I had to mount this thing somehow.  Once I discovered some cleverly-positioned mounting holes on the HxC SD Floppy Emulator itself, I realized it would be very possible to simply use the old mounting bay for the Korg’s original 720K drive…, a few securing screws, and a small window to view what you were doing.  Alright…. stop!   Dremel time…

Korg DSS-1 Floppy Upgrade 1

Korg DSS-1 Floppy Upgrade 2

Korg DSS-1 Floppy Upgrade 3

Korg DSS-1 Floppy Upgrade 4

Korg DSS-1 Floppy Upgrade 5

…and just for you, I recorded a janky,  volume-wacky, caffeine-fueled video to show you personally how this unit works with the new floppy emulator:

This project all stemmed from me adopting this huge airplane-wing-of-a-beast unit, knowing I’d have to deal with the floppy drive.  I figured “…oh easy fix.”  How yes and no that statement really was.  I got lucky.  Actually, Korg DSS-1, Prophet 2000 and other vintage-tech nerds are lucky, because this little HxC SD Floppy Emulator is a godsend.   I cannot thank Jeff and Lotharek enough for making this beauty, and I hope they keep making other innovations with us in mind. While requiring a little research and tech know-how, the Korg DSS-1 can take a step towards 21st century relevance once again.

Want to start your own Korg DSS-1 upgrade?  Don’t have a DSS-1 or you want to find out if one of these upgrades might be for you?  Visit Lotharek’s site, where you can find a list of compatible devices, videos, and other stuff: (Tell ’em Kyle Weiss sent you.)

Good luck, and happy nerding/synthing.

Tags: , , , , , , , , , ,

7 responses to “Korg DSS-1 Gets New/Cheap Floppy Alternative: Now in SD!”

  1. Jim Atwood says:

    Thanks for the great write up about your experience with the HxC Floppy Emulator. I currently have a Roland W-30 and S-330 that I am trying to determine if this “could” work with. My main problem is that both Roland devices are Shugart based and require boot disks in order to work. I’m tempted to go for it since chatter on the HxC forums indicate this works with old Emulator, SP1200, and now DSS-1 synth/samplers. The Roland S-50 is indicated as compatible in the documentation (which is compatible with both W-30 and S-330), but there is no word on the forums or around the internet of this to be true. Not sure. Any thoughts would be great appreciated. Thanks! – Jim

    • Kyle Weiss says:

      Hey Jim!

      The HxC forums would be your best bet. Jeff, who I believe does all of the software compatibility, should be able to answer whether or not this device might solve your problems.

      I do know I use the Shugart settings when I create the HxC SD Floppy Emulator config files, but that’s only the beginning. If Roland’s OS is really fickle, it may not work.

      In theory, I’d think any unit that needs a “bootable OS,”
      from a floppy would work, provided that was the file loaded first from the SD card into the emulator, and had that data ready to be accessed. Since the HxC SD Floppy Emulator is system independent, it just gives out and accepts any information necessary, even though it is probably “smarter,” and more advanced than the OS is! It just lets all the older units it is installed into think they’re in control. :)

      Good luck, maybe you’ll be doing your own video about the first Roland W-30 or S-330 install of this unit! Though I do have to admit, getting it to mount usefully in the S-330 will be a challenge being a rack unit. Anything is possible, though!

  2. mike says:

    should work for other rolands….the emu emax also boots from os on floppy…and this works fine with HxC

  3. Chris says:

    Just got my DSS-1 today! Thank you so much for this, I’m going to give this a go!

  4. kent tanner says:

    Hey there Kyle, I’m the guy who purchased this synth from you some time ago. It’s been wonderfull to enjoy however I am having some difficulty getting sounds from Glenn’s website onto the SD card to be read by. the Korg. I am no computer wiz and am probably missing something simple. If you have time any support would be greatly appreciated. Thanx Kent

  5. Mirko Bukna says:

    I have DSS-1 Korg sinthesizer,can you please tell me where and how I can to buy this floppy simulator for SD card or USB flopy simulator and which type of simulator I must buy for DSS-1 sinth. my flopy drive is Canon MD350.
    Thank`s and besr regards

    Mirko Bukna Kurtz

  6. T says:

    Greetings. I apologize if I have not read the correct instructions. I find there are so many downloadable version of user manuals I have finally become lost and confused. I recently purchased a HxC floppy emulator for my Korg DSS-1. The installation went very quick. The software on the other hand has me very confused.I have tried every method I can find to get up and running including the quick install with no results. The emulator sees the files, but when I try to load the sound to the keyboard I receive a “No File” message. I also have not been able to properly utilize the accompanying software. When I try to export the HXCSDFE.CFG or any other files I receive a disc is write protected message. The SD card is absolutely not write protected. I am feeling defeated and not as tech savvy as I thought I might be. I am hoping I can receive a guide specifically geared towards the DSS-1 set-up. I feel that this is my last attempt at utilizing this marvelous device before I give up and re-install the floppy drive. I read that you too had some struggles setting up the software and thought you may be able to help guide me through this. Any help you can provide would be greatly appreciated. Thank you.

Leave a Reply

Set your avatar at Gravatar